The HOWA M1500 Hogue 25cm 22″ TB Black is a factory-built precision rifle that skips the guesswork. Howa paired their cold-hammer-forged, sub-MOA barreled action with a Hogue OverMolded stock—pillar bedded from the factory—so you get consistent bedding and a repeatable zero without gunsmithing. At $569.61, this is a straight-up value for anyone who wants to shoot small groups right out of the box.
| Manufacturer | Howa (Legacy Sports International) |
|---|---|
| Model | M1500 Hogue 25cm 22″ TB Black |
| Material | Cold-hammer-forged steel barrel, 4140 steel action, Hogue OverMolded synthetic stock with full-length aluminum bedding pillar |
| Compatibility | Howa 1500 short-action bottom metal, AICS-pattern magazines (with appropriate floorplate), standard scope bases |
| Finish | Blued barrel and action, black textured rubber overmold on stock |
| Weight | 8.1 lbs (per manufacturer specs) |
| Condition | New |
Key Features
- Pillar-Bedded Hogue OverMolded Stock – The aluminum bedding pillar locks the action into a rigid, repeatable position. That means your point of impact stays consistent shot after shot, even when the stock flexes under sling tension or bipod load.
- Cold-Hammer-Forged 22″ Barrel with 1:10 Twist – Howa forges their barrels from 4140 steel, then stress-relieves and straightens them. The 1:10 twist stabilizes 140–180gr projectiles perfectly for .308 Win, and the 22″ length gives you enough velocity for 600-yard work without the extra weight of a 26″ tube.
- Two-Stage HACT Trigger – The Howa Actuator Controlled Trigger breaks clean at 2–3 lbs from the factory, with no creep after the take-up stage. Per Howa specs, it’s adjustable, but most shooters leave it alone because it’s that good out of the box.
- Integral Scope Base (8-40 Screws) – The receiver is drilled and tapped for #8-40 screws, not the weaker #6-48 found on many budget rifles. This gives you a rock-solid mount for heavy competition scopes without stripping threads.
Who It’s For
This rifle is built for the shooter who wants to compete in PRS Production or NRA High Power without dropping $2,000 on a custom action. It’s also perfect for the hunter who wants one rifle that can shoot 1/2 MOA at the range and still carry through the timber. If you’re a reloader who wants a consistent platform to develop loads, the M1500 Hogue gives you the repeatability you need without the custom price tag.
Pros & Cons
- Pros: Sub-MOA guarantee out of the box, pillar-bedded stock for consistent accuracy, durable synthetic stock that doesn’t swell in wet weather, adjustable trigger with a clean break, and an integral scope base that accepts standard rings.
- Cons: The Hogue stock is flexible under heavy bipod loading—if you’re shooting off a barricade with hard contact, you might see point-of-impact shifts. A chassis upgrade solves it, but that adds cost. Also, the factory floorplate is polymer; it works, but it’s not as robust as a metal bottom metal.
Comparison vs. Competitors
| Feature | HOWA M1500 Hogue 25cm | Tikka T3x Lite | Savage 110 Tactical Desert |
|---|---|---|---|
| Barrel | 22″ cold-hammer-forged, 1:10 twist | 22.4″ cold-hammer-forged, 1:11 twist | 24″ button-rifled, 1:10 twist |
| Stock | Hogue OverMolded, pillar bedded | Synthetic, aluminum bedding block | AccuStock with aluminum rail |
| Trigger | HACT two-stage, 2–3 lbs adjustable | Single-stage, 2–4 lbs adjustable | AccuTrigger, 2.5–6 lbs adjustable |
| Weight | 8.1 lbs | 6.3 lbs | 9.8 lbs |
| Price | $569.61 | $749.00 | $679.00 |
| Magazine | Internal box (5-round) | Internal box (3-round) | Detachable box (10-round) |
What’s the barrel twist rate on the HOWA M1500 Hogue 25cm?
The .308 Win version uses a 1:10 twist rate, which stabilizes bullets from 140 to 180 grains. That covers everything from light match loads to heavy hunting projectiles. Per Howa specs, the barrel is cold-hammer-forged from 4140 steel and is guaranteed to shoot sub-MOA with match ammunition.
Can I use AICS magazines with this rifle?
Out of the box, the HOWA M1500 Hogue uses an internal box magazine with a polymer floorplate. It does not accept AICS-pattern magazines without swapping the bottom metal. Several aftermarket companies (like IBI and MDT) make AICS-compatible bottom metal for Howa 1500 actions, but that’s an additional purchase.
Is the trigger adjustable without a gunsmith?
Yes. The HACT trigger has an external adjustment screw on the front of the trigger shoe. You can adjust pull weight from roughly 2 to 3.5 lbs using a 1.5mm hex key. Howa recommends not going below 2 lbs for safety. No special tools or gunsmithing required.
Does this rifle come with scope bases or rings?
The receiver is drilled and tapped for #8-40 screws and comes with a one-piece Picatinny rail installed from the factory. You’ll need to buy scope rings separately—standard 30mm or 1-inch rings work with the rail.
Ready to build a competition load or take it to the range? The HOWA M1500 Hogue 25cm 22″ TB Black ships in 1–2 business days, nationwide to all 50 states. 30-day returns if it’s not what you expected. Secure checkout.
- ✔ Nationwide delivery to all 50 states
- ✔ Ships 1–2 business days
- ✔ 30-day returns
- ✔ Secure checkout
Browse more bolt-action rifles in our Bolt Action Rifles category, or check out Precision Rifles and Hunting Rifles for similar options.
Last updated: April 2026
Reviews
There are no reviews yet.